Interfaces
The CAN Message Repeater is used to translate or modify messages from one protocol to another on the same CAN Bus.
The Analog Trim TAB Gateway has two 0~5v analog inputs and a CAN Bus to measure Trim TAB position and transmit the information to a NMEA2000 compatible display.
The Exhaust Gas Thermocouple Probe can measure temperatures up to 1250 degC and output a 0~5v analog signal for measurement and control purposes.
The Data Gateway includes two CAN Buses and can be used to translate data from one CAN protocol to another. With two CAN Buses, the data can be transferred from a CAN Bus running one baud rate to another CAN Bus using a different baud rate.
